The Landing — Cold Plunge Drain Basin
🚢 Free shipping — Continental US & Canada · See product details for lead time
The First Step Out Is the Most Important.
Every cold plunge session ends the same way — you step out of the water. The Landing is a purpose-built draining basin designed to receive that step safely. A non-slip acrylic and wood plastic platform catches the water dripping from your body, protects your floor, and gives you a stable, secure surface underfoot in the moment you need it most. Clean lines, spa-grade construction, available in Frost and Forge.
Select a finish to see details. Both finishes are available in the same dimensions and construction.
Dimensions
The Landing is designed for use with The Tempest and Tempest Pro but fits any freestanding cold plunge. At 50 inches long and 22 inches wide, it covers the full exit area of most standard cold plunge tubs. The low 3.2-inch profile sits flush to the floor and poses no trip hazard.
The step surface of The Landing features a built-in non-slip texture. When you exit a cold plunge your feet are wet, your body is in a neurological transition state, and your reflexes are affected by the cold. A secure underfoot surface is not a luxury — it is a safety requirement. The Landing is designed with this in mind.
A cold plunge exit drips significant water volume onto whatever surface is beneath it. The Landing's raised acrylic basin catches and contains that water, protecting hardwood, tile, concrete, or any flooring underneath.
→ No puddles. No water damage.Exiting cold water with wet feet onto a hard floor is a genuine slip risk. The non-slip step surface gives you a secure landing point at the moment your balance and reflexes are most affected by the cold.
→ Stable footing. Every session.Acrylic and wood plastic composite are both designed for wet environments — they do not warp, rot, or degrade with repeated water exposure the way natural wood does. Built to last as long as your cold plunge.
→ Built for water. Indefinitely.A cold plunge setup without a proper exit basin is an unfinished setup. The Landing completes the functional picture — cold plunge, exit basin, and accessories all working together as a cohesive system.
→ The setup is the practice.Key Features
- Non-slip step surface — built-in texture for safe footing on wet exit
- Water-collection basin — raised sides catch and contain water dripping from the body post-immersion
- Acrylic + wood plastic composite construction — moisture-resistant, warp-proof, designed for sustained wet-environment use
- Low 3.2" profile — sits flush to the floor, no trip hazard, easy step-on from any height
- 50" × 22" platform — covers the full exit area of standard cold plunge tubs
- Available in Frost (white) and Forge (black) — two finishes to match any setup
- Universal fit — compatible with The Tempest, Tempest Pro, and most freestanding cold plunges
- Easy to clean — wipe down or rinse after sessions
Technical Specifications
| Product Name | The Landing — Cold Plunge Drain Basin |
| Dimensions | 50" L × 22" W × 3.2" H (127 × 56 × 8 cm) |
| Materials | Acrylic + wood plastic composite |
| Finishes | Frost (white) · Forge (black) |
| Surface | Non-slip texture — built in |
| Function | Water collection basin + step platform |
| Profile | Low-rise — 3.2" floor clearance |
| Care | Wipe or rinse clean. Air dry. |
| Compatibility | Universal — The Tempest, Tempest Pro, most cold plunges |
| Shipping | Free — Continental U.S. & Canada |
If The Landing arrives damaged or defective, contact warranty@frostforgedwellness.com within 7 days of delivery with your order number and photos. We will make it right.
Care note: The Landing is designed for indoor and covered outdoor use. Avoid prolonged direct UV exposure, which can affect acrylic finish over time. Clean with mild soap and water — avoid abrasive cleaners.
Add The Tempest or Tempest Pro
The Landing is designed to work alongside a Frost Forged cold plunge. If you have not yet invested in your primary unit, start here.
Shop Cold PlungesDoes it actually drain, or does it just collect water?
The Landing collects and contains water — it does not have a drain hole or plumbing connection. It holds the water that drips from your body as you exit the cold plunge. Empty by tilting or wiping out after sessions.
Will it fit next to The Tempest or Tempest Pro?
Yes. At 50 inches long and 22 inches wide, The Landing covers the full exit area of both Frost Forged cold plunge models. Position it flush against the side of the tub where you step out.
Is the non-slip surface effective when wet?
Yes. The non-slip texture is built into the step surface and is designed specifically for wet-foot contact on exit from a cold plunge. It performs on wet feet the same as on dry.
Does it work outdoors?
The Landing is suitable for covered outdoor use — under a roof, pergola, or overhang. Avoid direct prolonged UV or rain exposure, which can affect the acrylic finish over time.
How do I clean it?
Wipe down with a damp cloth or rinse with clean water after sessions. For deeper cleaning, use mild soap and water. Avoid abrasive cleaners or scrubbers that may scratch the acrylic surface.
Will it scratch my floor?
The Landing sits on the floor and is not intended to be moved frequently during use. If your flooring is sensitive, place a thin rubber mat underneath. It does not have adhesive feet included.
What is the return policy?
All sales are final for non-defective products. If The Landing arrives damaged or defective, contact warranty@frostforgedwellness.com within 7 days of delivery with your order number and photo documentation.
Questions about cold plunge accessories? Contact our team or browse the full Accessories collection.